Cabling, Power, and Connectivity
Can the intercom be used with a 4G mobile connection?
Robin intercoms do not have built-in 4G connectivity. However, they can be used in combination with an external 4G router. In this type of setup, the intercom is connected with an Ethernet cable to the 4G router. This allows the router to provide ...
How do I connect and secure the cables properly?
Robin intercoms use PoE (Power over Ethernet) to combine the supply of electrical power and network connectivity in one cable. At the back of the intercom device, the individual wires inside the Ethernet cable must be connected via the terminal block ...
Why is there no RJ45 connector on the intercom?
Robin intercoms use PoE (Power over Ethernet) to combine the supply of electrical power and network connectivity into one cable. In the back of the intercom device, the cable is not connected with a standard RJ45 Ethernet connector. Instead, there is ...
Does the intercom require a static IP address?
No. DHCP is supported and recommended, but a static IP can be configured if required for the installation.
What is the maximum cable length for the network connection?
The maximum recommended length for an Ethernet cable is 100 metres. According to the Ethernet standard, you can also use an extender if required. We recommend using CAT6 or CAT6e Ethernet cables to power Robin intercoms and ensure optimal performance ...
Does the intercom require a separate power supply?
No. All Robin intercoms are powered by PoE (Power over Ethernet), which means they receive power from the same cable used to connect them to the network. This means no separate power supply is needed for the intercom. If there is no appropriate ...
Is installing a network cable worth the effort?
We hear this question a lot. Not all buildings, particularly residential homes, are set up with Ethernet cables or ports in the correct locations for intercom systems. However, a wired intercom ensures long-term reliability and the best possible ...
Why is a wired connection preferred over WiFi?
All Robin intercoms are wired solutions. This means they require hard wiring with PoE network cables - they do not work with WiFI connections. A wired setup provides a stable and continuous connection for the intercom device. This means your video ...
What type of cable is required for Robin intercoms?
Robin intercoms require a network cable for operation. The devices are powered by PoE (Power over Ethernet) and require network connectivity to operate. PoE can be supplied either via a PoE switch or with mains power and a separate PoE injector. The ...