Does the intercom require a static IP address?

• Related Articles

• How does the intercom obtain an IP address?

  By default the intercom uses DHCP to automatically obtain an IP address from the network. However if required for the network environment, a static IP address can be assigned to the intercom. The IP address of the intercom can also be used to access ...

• What is the default IP address of an ievo Interface Board?

  The default IP address of any ievo Interface Board (part codes beginning IEVO-MB) is: 192.168.1.225 This article applies to the following products: IEVO-MB10K IEVO-MB10POE IEVO-MB50K IEVO-MB50KPOE

• Should I use a local IP or domain for the SIP server?

  A local IP address is recommended when the intercom is on the same network as the VoIP service server. This helps to reduce latency and improve stability in the calls.

• Does the intercom require maintenance after installation?

  Yes, but it is minimal. We recommend you occasionally clean the device. We also recommend that you ensure your device is kept up to date with the latest software updates. These updates are carried out in the Robin web portal. The intercom device ...

• What do I need before integrating the intercom with Microsoft Teams?

  Integrating the Robin intercom with Microsoft Teams requires an external licence for the CyberGate cloud-based gateway platform. This acts as a bridge between Teams and SIP devices such as the intercom. You will need a valid CyberGate licence and a ...