DIGIWAY General Information
Can DIGIWAY door operators be mounted on the door?
No. Both the DIGIWAY Plus and the DIGIWAY SR must be mounted on the frame above the door. Do not mount the door operator on the door leaf itself.
Can request-to-exit buttons be made wireless to operate DIGIWAY door operators?
Yes. The DIGIWAY Spring Return has a built-in radio receiver. To make a request-to-exit button wireless, you will need a TX26-MC1 transmitter. The transmitter requires a 9V battery and can be used to convert any request-to-exit button with Normally ...
Can DIGIWAY door operators be mounted externally?
No. All DIGIWAY door operators are for internal installation only.
How do I connect the DWSSS-5M1 safety sensor to the DIGIWAY door operator?
DWSSS-5M1 is an infrared safety sensor for use with DIGIWAY door automation. It can be used with both the DIGIWAY PLUS and DIGIWAY SR door operators, and is suitable for both indoor and outdoor installation. Download this guide to learn more about ...
How do I calibrate the door operator?
The DIGIWAY system benefits from an easy-to-use auto-calibration feature. To successfully complete the auto-calibration, you will need to: Set the spring pre-load tension (learn more) Set the door limits (learn more) Initiate the auto-calibration ...
How do I initiate auto-calibration?
Before starting the auto-calibration, you need to set the spring pre-load tension and set the door limits. For instructions for the full calibration process, view this article. When you are ready to initiate the auto-calibration, open the DIGIWAY ...
How do I set the door limits?
To correctly auto-calibrate the DIGIWAY, first you need to set the spring pre-load tension. For instructions for the full calibration process, see this article. Once the spring pre-load tension is set, you can set the door limits by following these ...
How do I set the spring pre-load tension?
First, open your DIGIWAY app and find the correct unit that you want to programme. Then, follow these steps to set the spring pre-tension: Hold down OK to enter the programming menu. From the menu, select Door Calibration and then Spring Preload. In ...