Can DIGIWAY door operators be mounted on the door?

Can DIGIWAY door operators be mounted on the door?

No. 

Both the DIGIWAY Plus and the DIGIWAY SR must be mounted on the frame above the door. 

Do not mount the door operator on the door leaf itself. 


Info
This article applies to the following products:
 DWSR102U
 DWPS102U




    • Related Articles

    • Can DIGIWAY door operators be mounted externally?

      No. All DIGIWAY door operators are for internal installation only. This article applies to the following products: DWSR102U DWPS102U

    • What power do the DIGIWAY door operators require?

      All DIGIWAY door operators, including the DIGIWAY Spring Return and DIGIWAY Plus, are mains powered (230 Vac). This article applies to the following products: DWSR102U DWPS102U

    • Does the DIGIWAY Plus hold the door locked?

      No The DIGIWAY Plus door operator does not hold the door locked. An electronic lock is incorporated for this purpose. This article applies to the following product: DWPS102U

    • Can the DIGIWAY Plus work in wind-affected areas?

      As the DIGIWAY Plus is power-open and power-close, installation in windy or draughty areas will need to be carefully considered. The unit would need to be set up with strong forces to overcome any wind effect. In addition, the obstacle detection ...

    • Does the DIGIWAY Plus have an extended arm kit?

      No. The DIGIWAY Plus arm is a standard size to fit the parameters given for the installation. There are shaft extensions available if the unit needs to be mounted higher than typical. See DIGIWAY shaft extensions range This article applies to the ...