Can DIGIWAY door operators be mounted externally?
No.
All DIGIWAY door operators are for internal installation only.

This article applies to the following products:
Related Articles
Can DIGIWAY door operators be mounted on the door?
No. Both the DIGIWAY Plus and the DIGIWAY SR must be mounted on the frame above the door. Do not mount the door operator on the door leaf itself. This article applies to the following products: DWSR102U DWPS102U
What power do the DIGIWAY door operators require?
All DIGIWAY door operators, including the DIGIWAY Spring Return and DIGIWAY Plus, are mains powered (230 Vac). This article applies to the following products: DWSR102U DWPS102U
Does the DIGIWAY Spring Return hold the door locked?
The DIGIWAY SR door operator does not hold the door locked. It provides 12Vdc 1A and a full relay through which you can incorporate an electronic lock. This article applies to the following product: DWSR102U
Does the DIGIWAY Spring Return have an extended arm kit?
The sliding arm is a standard size to fit the parameters given for the install. There are extensions available for the articulated arm. There are also shaft extensions available if the unit needs to be mounted higher than a typical installation to ...
Does the DIGIWAY Spring Return have battery backup?
There is no battery backup for the DIGIWAY Spring Return. In the event of a power failure, the operator will work as a typical spring closer unless the power is provided by an uninterrupted power supply. If you are looking for a door operator with a ...