What power do the DIGIWAY door operators require?

What power do the DIGIWAY door operators require?

All DIGIWAY door operators, including the DIGIWAY Spring Return and DIGIWAY Plus, are mains powered (230 Vac).


Info
This article applies to the following products:
 DWSR102U
 DWPS102U


    • Related Articles

    • Can DIGIWAY door operators be mounted externally?

      No. All DIGIWAY door operators are for internal installation only. This article applies to the following products: DWSR102U DWPS102U
    • Can DIGIWAY door operators be mounted on the door?

      No. Both the DIGIWAY Plus and the DIGIWAY SR must be mounted on the frame above the door. Do not mount the door operator on the door leaf itself. This article applies to the following products: DWSR102U DWPS102U
    • Does the DIGIWAY Spring Return have battery backup?

      There is no battery backup for the DIGIWAY Spring Return. In the event of a power failure, the operator will work as a typical spring closer unless the power is provided by an uninterrupted power supply. If you are looking for a door operator with a ...
    • Does the DIGIWAY Spring Return hold the door locked?

      The DIGIWAY SR door operator does not hold the door locked. It provides 12Vdc 1A and a full relay through which you can incorporate an electronic lock. This article applies to the following product: DWSR102U
    • DIGIWAY Spring Return normal operation troubleshooting

      The door isn't operating when triggered Check the door's operation by using the direct open command. Make sure you exit the menu then use the bottom button to immediately trigger an open command. Alternatively, use the radio fob (once it has been ...