What SIP settings are required for CyberGate?

What SIP settings are required for CyberGate?

CyberGate acts as a bridge between Microsoft Teams and the Robin intercom. 

Before integrating, you must register your intercom device on the CyberGate platform. 

Once registered, CyberGate will automatically generate a SIP username and password. These credentials must then be configured in the intercom. 

Other typical configurations include: 
  1. SIP protocol: TCP 
  2. SIP proxy: cybergate.cybertwice.com
  3. Port: 5060
  4. Line ID: Equal to the CyberGate display name
  5. Username: Generated by CyberGate when you registered the device
  6. Password: Generated by Cybergate when you registered the device
  7. Registration: Enabled

Info
You will know that the integration connection is successful when you see Registered in the SIP registration status. 

    • Related Articles

    • How does the call flow work with CyberGate?

      CyberGate is the gateway that bridges SIP devices such as Robin intercoms with the Microsoft Teams environment. CyberGate licence(s) are required for a successful integration. When the intercom initiates a SIP call, it is sent to CyberGate. CyberGate ...

    • What SIP details are required from the VoIP service?

      When integrating Robin intercoms with a VoIP service such as 3CX, you will need: SIP server address port username password extension or Line ID

    • Does the Robin Intercom support Secure SIP?

      Yes. All Robin intercoms support SIP over UDP, TCP, and Secure SIP via TLS 1.2. This allows secure communication between the intercom and modern IP-PBX and VoIP platforms. Secure SIP ensures that call setup data, such as credentials and session ...

    • How do I add a device in CyberGate?

      Before initiating the Microsoft Teams integration, you must have a valid CyberGate licence. Once inside the CyberGate portal, you must also register your intercom device on the platform. To do this, navigate to Devices and then select Add Device. ...

    • Mobile-PASS: I had to reset my phone to factory settings - have I lost my license?

      Yes. For security reasons, if you restore your phone to factory default settings, any and all of your Mobile-PASS licenses in the ATRIUM BT app will be permanently deleted. You will need to contact your system administrator so that they can send you ...