CDV-27 2EASY Video Door Entry Wiring

What is the multi-coloured wire plug with the CDV-27 for?

This wire offers additional features that are not commonly used in most installations. 

It can give 12Vdc 100mA when a monitor is called, and two of the wires can be used as a doorbell connection if required. 
    • Related Articles

    • Input & output connections for 2EASY CDV-47 and CDV-470DX

      The 2EASY CDV-47 and CDV-470DX range of video door entry monitors are equipped with both inputs and outputs. Download this guide for a quick and easy diagram explaining all you need to know. If you require the manual of the previous version of 2EASY ...
    • How to set up CDV-DDP-F in Gateway Mode using CDV-BDU

      A CDV-DDP-F can be used as a master door station with the ability to call all buildings and internal monitors, with each building having its own ‘subsub’ panel(s) that can only call the internal monitors of that building. Download this guide to find ...
    • How to set up the VDP Connect app for use with your 2EASY video entry system

      VDP Connect is a free smartphone app for iOS and Android that allows you to control and operate your 2EASY video entry system from your phone. App features Better and faster video streaming See who's at the door from your smartphone Preview images ...
    • Can I get a dry output from the door station relay?

      Yes, you can. Refer to your 2EASY door station manuals for more information: CDV-91S Manual CDV-96KP Manual CDV-97ID Series Manual CDV-978ID Manual CDV-T5 Manual This usually involves removing a jumper from the back of the door station, and using PL ...
    • How do I stop getting feedback from a newly-installed video entry kit?

      This is likely caused by a protective film covering the monitor. The film also covers the microphone. If you remove it, you should find that the feedback problem is resolved. If feedback continues, raise a support ticket so that we can help you ...