Use Threadlock on all your maglock installations

Use Threadlock on all your maglock installations

Threadlock is the unsung hero of electro-magnetic locking projects. 

It's an adhesive that secures bolts and fixings in the correct place.

Without Threadlock, the tiny vibrations in the magnet in normal operation can gradually loosen fixings over time. If you use Threadlock, the performance and lifetime of the maglock are both increased. 

Threadlock bonds in less than 10 minutes and fills gaps to 0.25mm. 

However - don't use Studlock instead. Studlock is not a direct replacement for Threadlock. If you use Studlock instead, the screws will NEVER come out. You have been warned!

    • Related Articles

    • How to understand and use events in the ATRIUM software

      Introduction The Events section reports each event that occurs in the system in real-time. A specific event can be programmed to perform an action using macros; refer to the Macros section in this article for more information. The Events window lists ...
    • Can I use the Motion Detection feature described in the manual?

      Unfortunately, the Motion Detection feature uses a proprietary device that is not available in the UK. As such, it is currently not possible to use this feature in the UK.
    • What type of cable should I use and how far can I extend them?

      This article covers cabling requirements and limits for ievo biometric fingerprint readers. First check which Revision of ievo equipment you are using - it will be either REV3 or REV4. Revision 3 (REV3) Equipment REV3 ievo readers come supplied with ...
    • How to set up the VDP Connect app for use with your 2EASY video entry system

      VDP Connect is a free smartphone app for iOS and Android that allows you to control and operate your 2EASY video entry system from your phone.  App features Better and faster video streaming See who's at the door from your smartphone  Preview images ...
    • How do I use Lock 2 output?

      In order to activate the Lock 2 output, you will require a special extension part to be added to your 2EASY system. Please call your installer and ask them to install a CDV-RLC into your system.