Should I use SBC, direct connection, or LAN/VPN?
In most deployments of Robin intercoms with VoIP services such as 3CX, an SBC is used.
For local installations, a direct LAN connection is the preferred option.
Related Articles
Use Threadlock on all your maglock installations
Threadlock is the unsung hero of electro-magnetic locking projects. It's an adhesive that secures bolts and fixings in the correct place. Without Threadlock, the tiny vibrations in the magnet in normal operation can gradually loosen fixings over ...
What type of cable should I use and how far can I extend them?
This article covers cabling requirements and limits for ievo biometric fingerprint readers. First check which Revision of ievo equipment you are using - it will be either REV3 or REV4. Revision 3 (REV3) Equipment REV3 ievo readers come supplied with ...
How to set up the VDP Connect app for use with your 2EASY video entry system
VDP Connect is a free smartphone app for iOS and Android that allows you to control and operate your 2EASY video entry system from your phone. App features Better and faster video streaming See who's at the door from your smartphone Preview images ...
How to understand and use events in the ATRIUM software
Introduction The Events section reports each event that occurs in the system in real-time. A specific event can be programmed to perform an action using macros; refer to the Macros section in this article for more information. The Events window lists ...
What indicates a successful SIP connection?
The Control menu in the Robin web portal shows both the SIP registration status and any active call information in real time. When the SIP connection is successful, you will see the registration status in the intercom web portal labelled Registered. ...