Should I use a local IP or domain for the SIP server?
A local IP address is recommended when the intercom is on the same network as the VoIP service server.
This helps to reduce latency and improve stability in the calls.
Related Articles
What is the difference between SIP and Secure SIP?
SIP is used to set up and manage calls between an intercom device and a phone system. Standard SIP communication is not encrypted. Secure SIP (TLS) adds a layer of encryption to protect the signalling between the intercom and the SIP server. It ...
How do I set up the 2EASY mobile app to receive calls?
The 2EASY video door entry system comes with a free iOS smartphone app that allows you to receive voice and video calls from the door station directly to your phone. Watch the video or follow the steps below to learn how to connect your monitor to ...
What indicates a successful SIP connection?
The Control menu in the Robin web portal shows both the SIP registration status and any active call information in real time. When the SIP connection is successful, you will see the registration status in the intercom web portal labelled Registered. ...
What is the default IP address of an ievo Interface Board?
The default IP address of any ievo Interface Board (part codes beginning IEVO-MB) is: 192.168.1.225 This article applies to the following products: IEVO-MB10K IEVO-MB10POE IEVO-MB50K IEVO-MB50KPOE
Does the Robin Intercom support Secure SIP?
Yes. All Robin intercoms support SIP over UDP, TCP, and Secure SIP via TLS 1.2. This allows secure communication between the intercom and modern IP-PBX and VoIP platforms. Secure SIP ensures that call setup data, such as credentials and session ...