Input & output connections for 2EASY CDV-47 and CDV-47DX
The 2EASY CDV-47 and CDV-47DX range of video door entry monitors are equipped with both inputs and outputs.
The guide covers these models: CDV47MG, CDV47MG2 and CDV47DX 7" monitors.
Understanding inputs and outputs in the ATRIUM software
Inputs Introduction Typically, inputs are used to monitor the status of door contacts and request for exit devices installed on the controlled door. Inputs can activate relays, reader outputs or bell outputs through the use of macros. Each controller ...
How to set up CDV-DDP-F in Gateway Mode using CDV-BDU
A CDV-DDP-F can be used as a master door station with the ability to call all buildings and internal monitors, with each building having its own ‘subsub’ panel(s) that can only call the internal monitors of that building. Download this guide to find ...
How do I use Lock 2 output?
In order to activate the Lock 2 output, you will require a special extension part to be added to your 2EASY system. Please call your installer and ask them to install a CDV-RLC into your system.
Can I get a dry output from the door station relay?
Yes, you can. Refer to your 2EASY door station manual for more information. This usually involves removing a jumper from the back of the door station, and using PL and S1+. However, if there is a DS-ERL included with the door station, then you can ...
How to set up the VDP Connect app for use with your 2EASY video entry system
VDP Connect is a free smartphone app for iOS and Android that allows you to control and operate your 2EASY video entry system from your phone. App features Better and faster video streaming See who's at the door from your smartphone Preview images ...