How to set up CDV-DDP-F in Gateway Mode using CDV-BDU

A CDV-DDP-F can be used as a master door station with the ability to call all buildings and internal monitors, with each building having its own ‘subsub’ panel(s) that can only call the internal monitors of that building.

Download this guide to find out how to wire and configure the door stations and the CDV-BDU module.

• Related Articles

• Can I create a shortcut to my door station camera?

  Yes, you can!  It's really easy to view a door station camera from your 2EASY monitor by navigating through a couple of menus. But it's even easier to do it directly from your home screen using a handy shortcut.  By default, there are no shortcuts ...

• How to set up the VDP Connect app for use with your 2EASY video entry system

  VDP Connect is a free smartphone app for iOS and Android that allows you to control and operate your 2EASY video entry system from your phone.  App features Better and faster video streaming See who's at the door from your smartphone  Preview images ...

• Can I get a dry output from the door station relay?

  Yes, you can.  Refer to your 2EASY door station manual for more information.  This usually involves removing a jumper from the back of the door station, and using PL and S1+. However, if there is a DS-ERL included with the door station, then you can ...

• Input & output connections for 2EASY CDV-47 and CDV-47DX

  The 2EASY CDV-47 and CDV-47DX range of video door entry monitors are equipped with both inputs and outputs. Download this guide for a quick and easy diagram explaining all you need to know. The guide covers these models: CDV47MG, CDV47MG2 and CDV47DX ...

• How do I set up the 2EASY mobile app to receive calls?

   The 2EASY video door entry system comes with a free iOS smartphone app that allows you to receive voice and video calls from the door station directly to your phone. Watch the video or follow the steps below to learn how to connect your monitor to ...