How to make an exit button wireless

Any exit button can be made wireless quickly and easily with the TX26-MC1 universal transmitter. 

The TX26-MC1 gives you a wireless link from point A to point B. It's equipped with a 9-volt connector, a normally open (N/O) and a common (COM) connection.

How to adapt an exit button for wireless operation: 

1. Connect a battery to the 9-volt connector on the transmitter. 
   
2. Use the N/O and COM connections to wire the transmitter into the exit button. 
   
3. Pair the transmitter with its corresponding receiver. 
   
4. Set the receiver to trigger your desired action: for example, automatically opening a door. 
   

The TX26-MC1 is an ideal solution for sites where cable management is challenging; for example, listed buildings or sites with glass walls. With up to 1000m read range, the universal transmitter is a convenient and flexible solution for a huge range of projects. 

Learn more about TX26-MC1

• Related Articles

• Can request-to-exit buttons be made wireless to operate DIGIWAY door operators?

  Yes. The DIGIWAY Spring Return has a built-in radio receiver. To make a request-to-exit button wireless, you will need a TX26-MC1 transmitter. The transmitter requires a 9V battery and can be used to convert any request-to-exit button with Normally ...

• Can transmitters be used to operate the DIGIWAY Spring Return?

  Yes. The DIGIWAY Spring Return comes with a built-in radio receiver inside the operator. Any of CDVI's TX26 range of transmitters can be added into the memory to activate the unit. The maximum number of transmitters that can be added to the ...

• When I press the call button I get three beeps and the statement ‘user unavailable’

  The most likely cause for this problem is that the 2EASY monitor has not been set up as part of a kit system. You can quickly fix this issue by following these simple steps:  Touch the 2EASY monitor to bring up the main screen. From there, select ...

• The exit button isn’t unlocking the door for a timed period. How do I change this?

  At your door station, as standard the exit button only unlocks the door for the duration that the button is being pressed. It is possible to use the exit button as a trigger for a automatic timed unlocking period by adding extra parts to your system. ...

• How do I delete a transmitter from an XPL receiver?

  To delete a transmitter from the memory of a CDVI XPL receiver, simply follow these steps:  Press and hold the P1 button to enter the menu. Scroll down using P2 until you reach Delete. Then press P1 to confirm your selection. In the Delete menu, ...