How do I set the SOS function on my 2EASY monitor?

How do I set the SOS function?

The SOS function allowed an emergency message to be sent by SMS. On older CDV-47M monitors the SOS function can be set under ‘Call Scene’ (Divert) but a CDV-GSM is required. Unfortunately, unless existing it is no longer available for new installations or additions.

 

The SOS light on the CDV47DX is no longer utilised, it is purely there to show when the monitor is booting up.


    • Related Articles

    • Input & output connections for 2EASY CDV-47 and CDV-47DX

      The 2EASY CDV-47 and CDV-47DX range of video door entry monitors are equipped with both inputs and outputs. Download this guide for a quick and easy diagram explaining all you need to know. The guide covers these models: CDV47MG, CDV47MG2 and CDV47DX ...

    • How to set up CDV-DDP-F in Gateway Mode using CDV-BDU

      A CDV-DDP-F can be used as a master door station with the ability to call all buildings and internal monitors, with each building having its own ‘subsub’ panel(s) that can only call the internal monitors of that building. Download this guide to find ...

    • Can I turn off the SOS light?

      No, the SOS light cannot be turned off on any model. 

    • How do I programme my 2EASY CDV-96KP keypad?

      The CDV-96KP keypad is a door entry station for use with the 2EASY range of products. It can be installed indoors or outdoors and benefits from a touch-sensitive keypad and high-resolution camera.  Programming the CDV-96KP is quick and simple - ...

    • How do I set or change the time on my monitor?

      To set or update the time on your 2EASY monitor, from the home screen open your Settings.  Navigate to the General tab and then select Date and Time. Press Time - this will open the keyboard input screen.  Enter the time you want to set the monitor ...