How to add a controller to ATRIUM software

How do I add a controller on the ATRIUM software?



To add a controller to your ATRIUM software, follow these steps: 
  1. Open up the ATRIUM software. 
  2. Click Add Controller.
  3. When the dialogue box appears, click Auto-Detect to search for nearby available devices.
  4. Chose the correct device from the list and then click Select.
  5. When the dialogue box auto-fills with the details of the ATRIUM device, click Save. 
  6. Then, wait for the software to synchronise with the ATRIUM device. This can take a couple of minutes. 
  7. Once the controller's Status has changed to Online, you're done!

To view more ATRIUM FAQ videos, check out our Youtube channel. 

    • Related Articles

    • How do I add an access level using the ATRIUM software?

      To set up and apply access levels to your installation using the ATRIUM software, follow these steps:  First, open the ATRIUM software on your device.  Then, in the Dashboard tab, click the Access Levels icon. Click Add.  In the dialogue box, enter a ...

    • How do I add a card or tag to my ATRIUM installation from the reader?

      To register a new access credential (card/tag) on your ATRIUM system, follow these steps:  First, open the ATRIUM web portal on your device. Then, hold the credential you wish to add up to the installed reader. The reader will not recognise the ...

    • How to add a sub-controller in the ATRIUM software

      This article is about adding a sub-controller. If you need to learn how to add a controller, see this article. To add a second A22 set as a controller, first set the main A22 as a master controller (A22M): From the Hardware tab, click on the System ...

    • How to add a controller to ATRIUM in the software

      For each new account, the following screen is displayed to indicate that a controller needs to be associated with the account. To add a controller, proceed with the following steps. It is highly recommended that you reserve an IP address in the DHCP ...

    • How do I set up a new user in ATRIUM and assign credentials and access levels?

      To set up a new user in the ATRIUM portal and assign them access cards/tags and access levels, follow the steps below. NOTE: In order to complete this process, you will need to pre-load credentials and pre-define access levels. First, open the ATRIUM ...