How do I add a card/tag to a reader using the Hex code?

To add a card or tag credential to your ATRIUM access control installation, follow these steps: 

1. First, open the ATRIUM web portal on your device. 
   
2. Then, in the Dashboard tab, click the Cards icon. 
   
3. Click Add. 
   
4. Enter a Display Name for the card/tag you are adding. 
   
5. Then, check the card/tag for the Hex code printed on it. 
   
6. Enter the Hex code in the ATRIUM portal, and then click Save. 
   
7. The card/tag you have added will now appear in the list of saved credentials. 
   

To see all our ATRIUM FAQ videos, check out our YouTube channel. 

• Related Articles

• How do I add a card or tag to my ATRIUM installation from the reader?

  To register a new access credential (card/tag) on your ATRIUM system, follow these steps:  First, open the ATRIUM web portal on your device. Then, hold the credential you wish to add up to the installed reader. The reader will not recognise the ...

• How do I set up a new user in ATRIUM and assign credentials and access levels?

  To set up a new user in the ATRIUM portal and assign them access cards/tags and access levels, follow the steps below. NOTE: In order to complete this process, you will need to pre-load credentials and pre-define access levels. First, open the ATRIUM ...

• How do I add a card and assign it to a user?

  To learn how to add a card to ATRIUM and assign it to a user using the web portal, watch this short video. 

• How do I add & assign an Access Level using the web server?

  To learn how to add and assign an Access Level using the ATRIUM web server, watch this short video. 

• How do I add an access level using the ATRIUM software?

  To set up and apply access levels to your installation using the ATRIUM software, follow these steps:  First, open the ATRIUM software on your device.  Then, in the Dashboard tab, click the Access Levels icon. Click Add.  In the dialogue box, enter a ...