How can I prevent IP blocking during testing?

If registration fails repeatedly during tested because of IP blocking, you can temporarily disable the SIP account.

This will prevent automatic blocking by security policies common in VoIP telephony services such as 3CX.

Related Articles
What is the default IP address of an ievo Interface Board?
The default IP address of any ievo Interface Board (part codes beginning IEVO-MB) is: 192.168.1.225 This article applies to the following products: IEVO-MB10K IEVO-MB10POE IEVO-MB50K IEVO-MB50KPOE
Does the intercom require a static IP address?
No. DHCP is supported and recommended, but a static IP can be configured if required for the installation.
How does the intercom obtain an IP address?
By default the intercom uses DHCP to automatically obtain an IP address from the network. However if required for the network environment, a static IP address can be assigned to the intercom. The IP address of the intercom can also be used to access ...
Should I use a local IP or domain for the SIP server?
A local IP address is recommended when the intercom is on the same network as the VoIP service server. This helps to reduce latency and improve stability in the calls.
The door station unlocks immediately as soon as a call is made. How do I prevent this?
This is an auto-unlock feature which is sometimes accidentally enabled on the CDV-43 monitor models. When your monitor rings, the unlock icon appears on the monitor for you to press to allow entry. If you tap or press it briefly, it unlocks the door ...

Related Articles