Does the intercom supply power to the door lock?

• Related Articles

• Do I need additional wiring for a door lock?

  Yes. An additional two-wire cable is required to connect an electronic door lock to the intercom. The intercom is powered by PoE (Power over Ethernet). The intercom does not supply power to an electronic lock. In order to connect an electronic lock, ...

• What power do the DIGIWAY door operators require?

  All DIGIWAY door operators, including the DIGIWAY Spring Return and DIGIWAY Plus, are mains powered (230 Vac). This article applies to the following products: DWSR102U DWPS102U

• Does the intercom require a separate power supply?

  No. All Robin intercoms are powered by PoE (Power over Ethernet), which means they receive power from the same cable used to connect them to the network. This means no separate power supply is needed for the intercom. If there is no appropriate ...

• How much power does an ievo reader require?

  An ievo system can pull up to 1.6 Amps, depending on which version of equipment you are using, as well as whether you are using any additions. We recommend powering an ievo system with an independent 12V, 2A power supply. Note that you can power two ...

• Can I install the intercom without connecting a door lock?

  Yes. The door lock connection is optional. Robin intercoms function in the same way either with or without the door lock connection.