Does the DIGIWAY Spring Return hold the door locked?

Does the DIGIWAY Spring Return hold the door locked?

The DIGIWAY SR door operator does not hold the door locked.

It provides 12Vdc 1A and a full relay through which you can incorporate an electronic lock.



Info
This article applies to the following product:
 DWSR102U


    • Related Articles

    • Does the DIGIWAY Plus hold the door locked?

      No The DIGIWAY Plus door operator does not hold the door locked. An electronic lock is incorporated for this purpose. This article applies to the following product: DWPS102U
    • DIGIWAY Spring Return auto-calibration troubleshooting

      General advice for setting up Fit the unit and arm as per the diagrams in the installation manual. The door must be completely free swinging with a physically defined close point - i.e. not a swing-through door. Any hydraulic or spring closing/hold ...
    • Can the DIGIWAY Spring Return be used manually?

      The DIGIWAY Spring Return is usually in semi-automatic mode. This means it works as: Power open (when triggered to open) OR manually push open THEN spring close. If users push through the door, it puts tension on the spring mechanism and does not ...
    • DIGIWAY Spring Return normal operation troubleshooting

      The door isn't operating when triggered Check the door's operation by using the direct open command. Make sure you exit the menu then use the bottom button to immediately trigger an open command. Alternatively, use the radio fob (once it has been ...
    • What power do the DIGIWAY door operators require?

      All DIGIWAY door operators, including the DIGIWAY Spring Return and DIGIWAY Plus, are mains powered (230 Vac). This article applies to the following products: DWSR102U DWPS102U