Does the DIGIWAY Spring Return have battery backup?
There is no battery backup for the DIGIWAY Spring Return.
In the event of a power failure, the operator will work as a typical spring closer unless the power is provided by an uninterrupted power supply.
If you are looking for a door operator with a battery backup, choose the DIGIWAY Plus (DWPS102U) instead.
This article applies to the following product:
DWSR102U |
Related Articles
Does the DIGIWAY Spring Return hold the door locked?
The DIGIWAY SR door operator does not hold the door locked. It provides 12Vdc 1A and a full relay through which you can incorporate an electronic lock. This article applies to the following product: DWSR102UCan the DIGIWAY Spring Return be used manually?
The DIGIWAY Spring Return is usually in semi-automatic mode. This means it works as: Power open (when triggered to open) OR manually push open THEN spring close. If users push through the door, it puts tension on the spring mechanism and does not ...DIGIWAY Spring Return auto-calibration troubleshooting
General advice for setting up Fit the unit and arm as per the diagrams in the installation manual. The door must be completely free swinging with a physically defined close point - i.e. not a swing-through door. Any hydraulic or spring closing/hold ...DIGIWAY Spring Return normal operation troubleshooting
The door isn't operating when triggered Check the door's operation by using the direct open command. Make sure you exit the menu then use the bottom button to immediately trigger an open command. Alternatively, use the radio fob (once it has been ...What power do the DIGIWAY door operators require?
All DIGIWAY door operators, including the DIGIWAY Spring Return and DIGIWAY Plus, are mains powered (230 Vac). This article applies to the following products: DWSR102U DWPS102U