Does the DIGIWAY Plus have an extended arm kit?
No.
The DIGIWAY Plus arm is a standard size to fit the parameters given for the installation.
There are
shaft extensions available if the unit needs to be mounted higher than typical.
This article applies to the following product:
Related Articles
Does the DIGIWAY Spring Return have an extended arm kit?
The sliding arm is a standard size to fit the parameters given for the install. There are extensions available for the articulated arm. There are also shaft extensions available if the unit needs to be mounted higher than a typical installation to ...
Does the DIGIWAY Plus hold the door locked?
No The DIGIWAY Plus door operator does not hold the door locked. An electronic lock is incorporated for this purpose. This article applies to the following product: DWPS102U
DIGIWAY Plus normal operation troubleshooting
The door isn't operating when triggered Check the door's operation by using the direct open command. Make sure you exit the menu then use the bottom button to immediately trigger an open command. Alternatively, use the radio fob (once it has been ...
Can the DIGIWAY Plus be used manually?
No The DIGIWAY Plus is a fully automatic door operator for swing doors. This means it powers open and powers closed. The door should not be used manually. If the door is required to be used manually, then the DIGIWAY Spring Return (DWSR102U) door ...
Can DIGIWAY door operators be mounted on the door?
No. Both the DIGIWAY Plus and the DIGIWAY SR must be mounted on the frame above the door. Do not mount the door operator on the door leaf itself. This article applies to the following products: DWSR102U DWPS102U