Can the intercom trigger actions automatically?
Yes.
Robin intercoms support event-based actions such as triggering a relay, starting a call, or sending a command automatically. It is also possible to automatically send HTTP or API commands to external systems.
Actions can be triggered by events such as a button press, incoming or outgoing calls, audio detection, or external inputs.
Events and actions are configurable in the Robin web portal.
Related Articles
Understanding macros, macro counters, and macro timers in the ATRIUM software
Introduction Macros are used to cause an action on a device when triggering on an event. The macro instructs a device to perform a specific action like Activate Relay, Lock Door (Latched), etc. The ATRIUM application allows the creation of a macro by ...
How does the intercom obtain an IP address?
By default the intercom uses DHCP to automatically obtain an IP address from the network. However if required for the network environment, a static IP address can be assigned to the intercom. The IP address of the intercom can also be used to access ...
Can I connect the intercom directly to a door or gate?
Yes. The intercom has a built-in relay that can be used to control a door, gate, or barrier. If you wish to trigger more than one action from the intercom, you can use the webrelay accessory.
How do I create a user for the Robin intercom in the VoIP service?
In your VoIP service admin portal, such as 3CX, create a new extension. Then, assign the extension to the intercom device. This extension will be used for SIP registration and call routing. After the extension is created, the VoIP service ...
How do intercom calls work?
When a visitor presses a call button on the intercom device, the intercom initiates a call. The destination of the call is predefined in the connected telephony system. Once the call is answered, two-way audio is established and, if supported, live ...