Can the DIGIWAY Plus be used manually?

No

The DIGIWAY Plus is a fully automatic door operator for swing doors. This means it powers open and powers closed. 

The door should not be used manually. If the door is required to be used manually, then the DIGIWAY Spring Return (DWSR102U) door operator should be used instead. 

Find out more about the DIGIWAY Spring Return (DWSR102U)

This article applies to the following product:

DWPS102U

• Related Articles

• Can the DIGIWAY Spring Return be used manually?

  The DIGIWAY Spring Return is usually in semi-automatic mode. This means it works as: Power open (when triggered to open) OR manually push open THEN spring close. If users push through the door, it puts tension on the spring mechanism and does not ...

• Does the DIGIWAY Plus hold the door locked?

  No The DIGIWAY Plus door operator does not hold the door locked. An electronic lock is incorporated for this purpose. This article applies to the following product: DWPS102U

• DIGIWAY Plus normal operation troubleshooting

  The door isn't operating when triggered Check the door's operation by using the direct open command. Make sure you exit the menu then use the bottom button to immediately trigger an open command. Alternatively, use the radio fob (once it has been ...

• Can DIGIWAY door operators be mounted on the door?

  No. Both the DIGIWAY Plus and the DIGIWAY SR must be mounted on the frame above the door. Do not mount the door operator on the door leaf itself. This article applies to the following products: DWSR102U DWPS102U

• How long does the DIGIWAY Plus battery back-up last?

  The DIGIWAY Plus comes with a 1.3AH backup battery as standard. The amount of time the battery lasts depends on the size of the door, how often it is in use, and what devices are connected to the DIGIWAY (e.g. locking, sensors) On average, the ...