Can the ievo fingerprint reader heads be used without the Interface Board?

• Related Articles

• What type of cable do I need to connect the reader head to the Interface Board?

  Every ievo fingerprint reader connects to the Interface Board via a bespoke PoE (Power over Ethernet) connection. The PoE connection carries both power and data. Therefore, high-quality shielded Ethernet cable should be used for this connection in ...

• How is biometric fingerprint data collected?

  ievo systems acquire biometric data by scanning a fingerprint and measuring and collecting unique reference points from a finger. This data is extracted, transferred, and via an advanced algorithm, stored as a template on a separate ievo Interface ...

• What is the default IP address of an ievo Interface Board?

  The default IP address of any ievo Interface Board (part codes beginning IEVO-MB) is: 192.168.1.225

• I have added a new Interface Board to the system, but registered fingerprints aren't being recognised.

  A new Interface Board will not automatically download the existing fingerprint database from the other boards. You will need to back up the database of an existing board using the ievo network tool, and then restore it to the new board. All the ...

• The fingerprint reader only flashes red when I place my finger on it.

  There are a couple of reasons why this might be happening. Finger placement First, ensure that you are placing your finger correctly on the scanner plate on the reader. Read our attached guide to understand best practice for placing your finger for ...