Can I turn off the ring-back tone on my CDV91 or CDV92?
Yes, you can!
First, go to your door station and carefully remove its front cover. Then, press the key set button four times (this is a small button in the top-left of the device). Then press button 1 - press it once to set the ring-back to continuous, twice to set it to a single ring-back, and three times to turn it off completely.
Wait ten seconds, and the door station will exit itself from its programming mode and return to normal usage.
Related Articles
Input & output connections for 2EASY CDV-47 and CDV-47DX
The 2EASY CDV-47 and CDV-47DX range of video door entry monitors are equipped with both inputs and outputs. Download this guide for a quick and easy diagram explaining all you need to know. The guide covers these models: CDV47MG, CDV47MG2 and CDV47DX ...
Can I increase the ring volume?
Yes, you can! All 2EASY monitors allow you to control the volume of the ring. Check your monitor’s ringtones or sounds settings to adjust the volume. If you have set the volume to maximum, and find that it is still not loud enough, some monitors can ...
How to set up CDV-DDP-F in Gateway Mode using CDV-BDU
A CDV-DDP-F can be used as a master door station with the ability to call all buildings and internal monitors, with each building having its own ‘subsub’ panel(s) that can only call the internal monitors of that building. Download this guide to find ...
Can I make the monitor ring for longer?
The monitor will play through its ringtone once only. Currently, it cannot be set to continuously ring. You can change the ringing time of your monitor by navigating to Settings > Ring Time. Enter the number of settings you want the monitor to ring ...
How do I programme my 2EASY CDV-96KP keypad?
The CDV-96KP keypad is a door entry station for use with the 2EASY range of products. It can be installed indoors or outdoors and benefits from a touch-sensitive keypad and high-resolution camera. Programming the CDV-96KP is quick and simple - ...