Can I record video on my 2EASY monitor instead of images?
Yes, you can!
To do this, you will need to get hold of a
micro-SD card with a storage capacity of no more than 32GB.
The process for setting up this function differs slightly
depending on the type of 2EASY system you’re using. Please check that you’re
following the correct instructions for your system below.
CDV47M
- In the top left-hand corner of your 2EASY
monitor, there is a small slot for your micro-SD card. Insert the micro-SD card
into the slot.
- Then, on the main screen of your 2EASY monitor,
select Multimedia.
- Then, select Format SD Card and press the tick (P) to
confirm. You should hear two beeps from the monitor once the micro-SD card has
finished formatting.
All calls will now be recorded in video format
and saved onto the micro-SD card.
Please note that when formatting the SD card, all existing
images will be deleted. Unfortunately, it is not currently possible to transfer
existing images to the SD card.
CD47DX
For this model , all you need to do is insert the SD card into the SD card slot. From this point, all calls will be recorded in video and saved onto the SD card.
It is also possible to transfer any existing recordings from the 2EASY monitor to the SD card, if you want to. There are instructions for doing this in your 2EASY manual.
Related Articles
How do I view missed call images?
From the main screen of your 2EASY monitor, select Call Record. This will bring up a list of past calls. From the list, select the call you wish to view. 2EASY will then show you a call image, as well as the date and time of the call. You can also ...How to set up the VDP Connect app for use with your 2EASY video entry system
VDP Connect is a free smartphone app for iOS and Android that allows you to control and operate your 2EASY video entry system from your phone. App features Better and faster video streaming See who's at the door from your smartphone Preview images ...Can I add an extra monitor?
Yes, you can! Ask your installer about adding an extra monitor to your system. Your main monitor in the system is known as the master, and any additional monitors are known as slaves. You can have up to four monitors in your system that can be called ...How do I call another monitor?
To make a call to another 2EASY monitor, you can use the Inner Call or Inner Broadcast functions. To use the Inner Call function, go to the main screen and select Intercoms, then select Inner Call. This will trigger a call to all the other 2EASY ...How do I stop getting feedback from a newly-installed video entry kit?
This is likely caused by a protective film covering the monitor. The film also covers the microphone. If you remove it, you should find that the feedback problem is resolved. If feedback continues, raise a support ticket so that we can help you ...