Can I control multiple doors or locks with the intercom?
Yes.
To control multiple devices within a single installation, you will need an external relay module such as the Robin Webrelay. This enables you to trigger multiple doors, gates, barriers, or other devices from the same door station.
This setup is ideal for larger installations such as office buildings, industrial sites, or residential complexes where multiple access points need to be managed.
The Robin Webrelay supports up to 4 independent relays to control up to 4 different devices separately. Each relay operates and can be triggered individually, allowing full control for every access point.
Each relay can be configured separately according to the needs of the application. There is a choice of switch on, switch off, or pulse mode for each relay.
Related Articles
Understanding locks in the ATRIUM software
Introduction Typically, locks are used to control door lock devices such as door strikes and electromagnetic devices. Each controller includes two door locks and supports up to four 2-Door Expansion Modules which provide an additional 2 door locks ...
Do electro-magnetic locks affect pacemakers?
If you are concerned about your pacemaker, always seek medical advice for detailed instructions on what you should or should not avoid. When pacemakers first became common medical devices, patients were advised to keep away from all magnets. This was ...
Understanding doors in the ATRIUM software
Overview The term door refers to any access point controlled by a reader and/or keypad such as a door, turnstile, gate, and wireless or wired door handles. To control entry and exit through an access point (door), a reader and/or keypad can be used ...
Mobile-PASS: Why are doors not unlocking?
If you have set up and activated your Mobile-PASS licenses, but the doors are not unlocking, see here some possible solutions: Make sure the app is open when trying to unlock a door Check that Bluetooth and/or NFC are turned on. Make sure you are ...
Can multiple users view the intercom at the same time?
Yes. Multiple users can access the video simultaneously without affecting each other's experience.