Can I connect a door relay or external chime?
Yes.
Robin intercoms support the connection of an internal door relay as well as an external chime.
This allows you to trigger a door opener or an additional ringing device depending on your installation setup.
To trigger more than one action from the intercom, you will need the additional webrelay accessory.
Related Articles
Can I get a dry output from the door station relay?
Yes, you can. Refer to your 2EASY door station manuals for more information: CDV-91S Manual CDV-96KP Manual CDV-97ID Series Manual CDV-978ID Manual CDV-T5 Manual This usually involves removing a jumper from the back of the door station, and using PL ...When do I need an external relay module instead of the internal relay?
The built-in internal relay in the intercom device is suitable for controlling a single door or lock. If you need to control multiple devices or entry points, or integrate with larger systems, we recommend an external relay like the Robin Webrelay. ...Where should the external relay module be installed?
When using an external relay module such as the IP Quad Relay (WEBRELAIS), the most secure setup is to install the module inside on the secure side of the door. Many installers do this inside a secured technical room or cabinet. This makes the ...Does the DIGIWAY Spring Return hold the door locked?
The DIGIWAY SR door operator does not hold the door locked. It provides 12Vdc 1A and a full relay through which you can incorporate an electronic lock. This article applies to the following product: DWSR102USwitch & Relay Contacts Explained
Single Pole SPST - Single Pole Single Throw This type of contact has one normally open or one normally closed contact. When activated by a switch actuator or an energised relay the switch contact changes state. For the relay example in the image - ...