Can I add an extra door station to my 2EASY Video Door Entry system?

Can I add an extra door station?

Yes, you can!


You can have up to 4 door stations on any 2EASY system.
Adding extra door stations will also require some additional units in the electronics to keep everything running smoothly. Ask your installer about a CDV-DBC4A and about the cable quality. When extra parts are added, it becomes more important to have the correct quality of cable to ensure good-quality communication.




    • Related Articles

    • Can I create a shortcut to my door station camera?

      Yes, you can!  It's really easy to view a door station camera from your 2EASY monitor by navigating through a couple of menus. But it's even easier to do it directly from your home screen using a handy shortcut.  By default, there are no shortcuts ...
    • Can I add an extra monitor?

      Yes, you can! Ask your installer about adding an extra monitor to your system. Your main monitor in the system is known as the master, and any additional monitors are known as slaves. You can have up to four monitors in your system that can be called ...
    • How do I view a door station camera on my monitor?

      To view a door station from your 2EASY monitor, press Monitor on your home screen. Then, select the door station you want to view from the available list. This will activate the camera and open it up on your monitor for you to view. Simple as that!  ...
    • Can I get a dry output from the door station relay?

      Yes, you can.  Refer to your 2EASY door station manual for more information.  This usually involves removing a jumper from the back of the door station, and using PL and S1+. However, if there is a DS-ERL included with the door station, then you can ...
    • My door station is not working. How do I fix it?

      If the door station does not connect when a call is made and beeps three times, this is an indication that it cannot find a monitor inside to call. Each monitor in your system has an address, which you can view and edit in its settings. Check the ...