Adding a PIN code and Tags/cards to a DGPROX

Adding a PIN code and Tags/cards to a DGPROX

To add a PIN code to a DGPROX first make sure the unit is set to PIN & Proximity (*0 00) or PIN or Proximity (*0 02) .

A tag must be added in the location first, then instead of confirming the tag with a * enter a 5 digit pin code, then press # to exit programming.

For Example: Unit to be set for users to have a single PIN code and multiple proximity users.

Enter Master code twice
Default: 12345

Set Mode for PIN or Prox - *0 then 02

For PIN users:
  1. Enter first user location    - 000 then present tag/card (beep - led changes from green to orang
  2. Enter Pin Code to be used

For all other Proximity users:
Enter next location - 001 the present tag/card followed by * to confirm the device.

When finished enter # to exit programming mode.


Info
This article applies to the following product:
 DGPROX