Recent Articles
How to install the V3E35R maglock in the AH3 architectural housings
The V3E35R is a mortice mount magnet for use with the AH3 series of architectural maglock housings. This is a visual guide to installing the magnets into the housings. 1. These are the parts required to mount the maglock into the AH3 housing. 2. ...
Installing and setting up numberplate recognition for ATRIUM access control
1. Introduction The ACPR tool was developed to add number plates to users in the ATRIUM KRYPTO software. You can easily programme a user with a certain access level together with their number plate, so ATRIUM immediately recognises them and can open ...
Which ievo Interface Boards can be used on which sites?
If you have a site with existing REV3 equipment and the requirement is to add more ievo readers, they must use REV4S boards (IEVO-MB08K). REV4 boards (IEVO-MB10k or IEVO-MB50K) CANNOT be used. Brand new installations will only use the REV4 boards. If ...
Don't fit mini-mags on external doors
...unless there's a secondary locking mechanism for when the premises is empty. If a door just needs to be held closed to stop free access, then a 300kg mini-mag will suffice. But 300kg holding force is not enough to rely on for security purposes. If ...
Use Threadlock on all your maglock installations
Threadlock is the unsung hero of electro-magnetic locking projects. It's an adhesive that secures bolts and fixings in the correct place. Without Threadlock, the tiny vibrations in the magnet in normal operation can gradually loosen fixings over ...